Register new report settings and automatically create reports

Click [Report] on the left menu.
Click [Create New] right of [List of report settings].
You can register your report settings by making the following settings and clicking [Register].

After creating the report settings, make sure that [Enable] is checked for the settings you created from [List of report settings].
The report is automatically generated at the first UTC 00:00 after the period selected in [Report Type], the report is automatically generated and saved in the folder specified in [Report creation destination folder].

Statistics display settings

Select the type of statistics to be included in the report.

Graph display settings

Configure the display settings for the graphs to be included in the report.

• Display of measurement data graphs for each channel
  Graphs are displayed individually for the selected number of channels.
• Display of graph of measurement data for all channels
  All channels are displayed on the same graph.

Other display settings

Select whether or not alarm information should be included in the report if there are alarms in the data during the period of the selected channel.
The maximum number of alarms to be displayed is 100.
If you check [Also display previous day/week/month results], you can overlay and compare the previous values and the values of the target period on each graph.

Report creation destination folder

Specify the folder where the automatically generated reports will be saved.
You can select any folder in the Drive function data folder.

Report type

Select the type of report from Daily, Weekly, or Monthly. You can also select more than one.
Daily reports are generated using data from 00:00 to 23:59 daily.
Weekly reports are generated using data from 00:00 to 23:59 every Monday through Sunday.
Monthly reports are generated using data from 00:00 on the first day of each month to 23:59 on the last day of the month.

Channel selection

Select the channels to be included in the report.
Up to 32 channels can be selected from the currently selected GENNECT polled channels.